The Universal Wet-Sharpening Machine USK 160 S is suitable for universal use. The various grinding stations qualify it as a reliable tool for butcher shops, abattoirs, meat packing plants, sharpening services and more. The machine enables you to sharpen a variety of cutting tools such as butcher knives, boning knives, chef’s knives and cutlery.
Universal Wet-Sharpening Machine USK 160 S
Health protecting thanks to water cooling
Professional cutting edges
In conjunction with the HV 150, the machine is specially designed for sharpening hand knives.
The wet-grinding belt ensures a very fine cutting tool surface. The profiled rubber contact wheel applies the exact amount of grinding resistance to the knife.
A coolant pump supplies the individual sharpening stations with water. The cutting edges cannot be overheated during the sharpening process. The coolant water binds the grinding abrasion and avoid it from circulating in the air. This protects the operator’s respiratory system.
The machine is cleaned by simply hosing it down.
The advantages at a glance
Finned grinding wheelFine grinding of the cutting tools takes place on the water cooled finned grinding wheel. The soft fins lie against the knife profile. The fine grit gently removes only small amounts of material, thus preserving the knife.
Wet-honing wheelThe wet-honing wheel removes the burr caused by sharpening. The result is a sharp knife with a smooth surface and long tool life. The wet honing wheel is water-cooled – the polishing abrasion does not get into the environment
Polishing disk (optional)The polishing disk produces a finely polished surface and a burr-free, very smooth cutting edge. The precisely adjusted peripheral surface speed and the optimally balanced polishing disk resistance compensate for operational mistakes.
Hand knife grinding attachment HV 150The knife guides ensure that the hand knives are sharpened with the correct cutting edge angle at all times. Additional integrated magnets support the guidance of the knife and make the grinding process extremely simple. The long-life CBN grinding wheels are water-cooled.
Belt grinding attachment HV 161The belt grinding attachment enables angle true cutting edges on bowl cutter knives up to 120 l. with minimal effort. This means safe, precise and fatigue-proof working for the operator.
Serration grinding wheel (optional)Serration grinding wheels of various pitches enable quick and easy teething of cutlery knives. Cutlery knives are sharpened in three steps: Grinding out the old profile with the wet-grinding belt – teething on the serration grinding wheel – polishing and deburring with the polishing disk.
Know how to do it!